LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Engine Control System (2GR-FSE) - DTC P0171 - P050A) >> DTC P050A Cold Start Idle Air Control System Performance >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

P050A: 

TYPICAL ENABLING CONDITIONS

Battery voltage 8 V or more
Time after engine start 3 seconds or more
Starter OFF
ECT at engine start -10°C (14°F) or more
ECT -10°C to 50°C (14°F to 122°F)
Engine idling time 3 seconds or more
Fuel-cut OFF
Vehicle speed Less than 1.875 mph (3 km/h)
Time after shift position changed 1 second or more
Atmospheric pressure 76 kPa (570 mmHg) or more