LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Engine Control System (2GR-FSE) - DTC P0171 - P050A) >> DTC P0351 Ignition Coil "A" Primary / Secondary Circuit; DTC P0352 Ignition Coil "HB" Primary / Secondary Circuit; DTC P0353 Ignition Coil "C" Primary / Secondary Circuit; DTC P0354 Ignition Coil "D" Primary / Secondary Circuit; DTC P0355 Ignition Coil "E" Primary / Secondary Circuit; DTC P0356 Ignition Coil "F" Primary / Secondary Circuit >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS

Monitor runs whenever following DTCs are not present None
Either of the following conditions 1 or 2 is met: -
1. Both of the following conditions (a) and (b) are met: -
(a) Engine speed 500 rpm or less
(b) Battery voltage 6 V or more
2. All of the following conditions (d), (e) and (f) are met: -
(a) Engine speed More than 500 rpm
(b) Battery voltage 10 V or more
(c) Number of sparks after CPU is reset 5 sparks or more
scientia non olet · About LEMON Manuals