Typical Enabling Conditions
WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
All:
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever these DTCs are not present | None |
Case 1:
TYPICAL ENABLING CONDITIONS
| Time after starter OFF to ON | 3 seconds or more |
| Number of VVT sensor signal pulse | 6 times |
| Battery voltage | 7 V or more |
| Engine switch | ON |
Case 2:
TYPICAL ENABLING CONDITIONS
| Starter | OFF |
| Engine RPM | 600 rpm or more |
| Time after starter ON to OFF | 3 seconds or more |
Case 3:
TYPICAL ENABLING CONDITIONS
| Starter | ON |