LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Engine Control System (2GR-FSE) - System And Component Testing, On-Vehicle Inspection, Removal, Inspection & Installation) >> Integration Relay >> Installation

Integration Relay: Installation

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL INTEGRATION RELAY 
    1. Connect the 3 connectors.
    2. Attach the integration relay to the engine room No. 2 relay block.
    3. Install the No. 2 relay block cover.
      4. Fig 1: Locating No. 2 Relay Block Cover
      G05316274Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ENGINE ROOM SIDE COVER LH  (See INSTALLATION )
  3. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
scientia non olet · About LEMON Manuals