Accelerator Pedal: Installation

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Avoid physical shock to the accelerator pedal.
Do not disassemble the accelerator pedal assembly.

INSTALL ACCELERATOR PEDAL
1. Install the accelerator pedal with the 2 bolts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
2. Connect the accelerator pedal position sensor connector.
Fig 1: Locating Accelerator Pedal And Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002