LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Engine Control System - SFI System Diagnostics (4 Of 4)) >> DTC P1366 "E" Camshaft Position Actuator Circuit Open, Low, High Bank 1; DTC P1367 "E" Camshaft Position Actuator Circuit Open, Low, High Bank 2 >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is output when a diagnostic signal malfunction is detected in the intake side camshaft timing control motor The camshaft timing control motor is equipped with a self diagnostic function, which is used to output the condition of the camshaft timing control motor as a diagnosis signal (VTM) to the ECM. If the ECM receives a diagnosis signal that is not one of the set signals, a DTC is output immediately (1 trip detection logic)

If the engine is idled for 10 seconds, a DTC is detected