LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Engine Control System - SFI System Diagnostics (3 Of 4)) >> DTC P0724 Brake Switch "B" Circuit High >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

The stop light switch remains ON during GO and STOP 5 times.

GO and STOP are defined as follows; 

TYPICAL ENABLING CONDITIONS CHART

Monitor will run whenever following DTCs not present None
GO Vehicle speed 18 65 mph (30 km/h) or more
STOP Vehicle speed Less than 1 86 mph (3 km/h)