LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Engine Control System - SFI System Diagnostics (3 Of 4)) >> DTC P050B Cold Start Ignition Timing Performance >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS CHART

Battery voltage 8 V or more
Time after engine start 3 seconds or more
Starter OFF
Engine coolant temperature at engine start -10°C (14°F) or more
Engine coolant temperature -10 to 60°C (14 to 140°F)
Engine idling time 3 seconds or more
Fuel cut OFF
Vehicle speed Less than 1 875 mph (3 km/h)
Atmospheric pressure 76 kPa (570 mmHg) or more