LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Engine Control System - SFI System Diagnostics (1 Of 4)) >> DTC P0088 Fuel Rail / System Pressure - Too High >> Description

DTC P0088 Fuel Rail / System Pressure - Too High: Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0087 

DTC DETECTION CONDITION CHART

DTC No. DTC Detection Condition Trouble Area
P0088 ECM did not command fuel pump for high pressure to open spill control valve, but fuel pressure increases 3 MPa (306 kgf/cm2 , 435 psi) from target pressure for more than 10 seconds
(1 trip detection logic)
  • Fuel pump for high pressure (bank 1)
  • Fuel pump for high pressure (bank 2)
  • ECM