LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Engine Control System - SFI System Diagnostics (1 Of 4)) >> DTC P0014 Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1); DTC P0015 Camshaft Position "B" - Timing Over-Retarded (Bank 1); DTC P0024 Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 2); DTC P0025 Camshaft Position "B" - Timing Over-Retarded (Bank 2) >> Description

DTC P0014 Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1); DTC P0015 Camshaft Position "B" - Timing Over-Retarded (Bank 1); DTC P0024 Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 2); DTC P0025 Camshaft Position "B" - Timing Over-Retarded (Bank 2): Description

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0013  .

DTC DETECTION CONDITION CHART

DTC No. DTC Detection Condition Trouble Area
P0014
P0024
With engine warmed up and idling, exhaust valve timing does not change for 1 minute or more in advanced position
(2 trip detection logic)
  • Valve timing
  • Oil control valve for exhaust side (bank 1, 2)
  • Camshaft timing oil control valve filter (bank 1, 2)
  • Camshaft timing exhaust gear assembly
  • ECM
P0015
P0025
With engine warmed up and vehicle being driven, exhaust valve timing does not change for 5 minutes or more in retarded position
(1 trip detection logic)
  • Valve timing
  • Camshaft timing oil control valve for exhaust side (bank 1,2) Camshaft timing oil control valve filter (bank 1, 2)
  • Camshaft timing exhaust gear assembly
  • ECM