LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Engine Control System - SFI System Diagnostics (1 Of 4)) >> DTC P0012 Camshaft Position "A" - Timing Over-Retarded (Bank 1); DTC P0022 Camshaft Position "A" - Timing Over-Retarded (Bank 2) >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS CHART

Monitor runs whenever the following DTCs not present P0101 - P0103 (Mass air flow meter)
P0115 - P0118 (Engine coolant temperature sensor)
P0125 (Insufficient Engine coolant temperature for closed loop)
P0335 (Crankshaft position sensor)
P0340 (VVT sensor)
P0351 - P0358 (Igniter)
Battery voltage 11 V or more
Engine rpm 425 to 4000 rpm
Engine coolant temperature 75 to 120°C (167 to 248°F)
scientia non olet · About LEMON Manuals