LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Engine Control System - SFI System Diagnostics (1 Of 4)) >> DTC P0010 Camshaft 1) Position "A" Actuator Circuit (Bank 1); DTC P0020 Camshaft 2) Position "A" Actuator Circuit (Bank 2) >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS CHART

Monitor runs whenever the following DTCs not present None
All of the following conditions are met -
Battery voltage 11 V or more
Engine switch on (IG)
scientia non olet · About LEMON Manuals