DTC P0500 Vehicle Speed Sensor "A": Description
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
The speed sensor detects the wheel speed and sends the appropriate signals to the skid control ECU The skid control ECU converts these wheel speed signals into a 4-pulse signal and outputs it to the ECM via the combination meter. The ECM determines the vehicle speed based on the frequency of these pulse signals
DTC DETECTION CONDITION CHART
| DTC No | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0500 | While vehicle being driven, no vehicle speed sensor signal to ECM (1-tip detection logic) |
|