On-Vehicle Inspection
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
- Connect the Techstream to the DLC3.
- Start the engine and turn the Techstream ON
- Warm up the engine
- Enter the following menus Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1) or Control the VVT Exhaust Linear (Bank 2).
- Check the engine speed while operating the Oil Control Valve (OCV) using the Techstream.
Specified Condition
TESTER OPERATION SPECIFIED CONDITION CHARTTester Operation Specified Condition -100% Normal engine speed 100% Engine idles roughly If the result is not as specified, check the oil control valve, wiring and camshaft timing exhaust gear
HINT.
- Control the VVT Exhaust Linear (Bank 1). Command to activate the exhaust side oil control valve of bank 1
- Control the VVT Exhaust Linear (Bank 2) Command to activate the exhaust side oil control valve of bank 2.