Cooling Fan Motor: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE RADIATOR ASSEMBLY
HINT:

See REMOVAL
DISCONNECT COOLING FAN MOTOR CONNECTORS
1. Disconnect the 2 cooling fan motor connectors from the 2 cooling fan ECUs.
2. Disconnect the 2 clamps.
Fig 1: Locating Cooling Fan Motor Connectors
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 FAN
1. Remove the nut and No. 2 fan.
Fig 3: Locating No. 2 Fan Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COOLING FAN MOTOR
1. Remove the 3 screws and the cooling fan motor.
Fig 4: Locating Cooling Fan Motor Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 COOLING FAN MOTOR
1. Remove the 3 screws and the No. 2 cooling fan motor.
Fig 5: Locating No. 2 Cooling Fan Motor Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002