Cooling Fan Motor: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL NO. 2 COOLING FAN MOTOR
1. Install the No. 2 cooling fan motor with the 3 screws.
  Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
Fig 1: Locating No. 2 Cooling Fan Motor Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL COOLING FAN MOTOR
1. Install the cooling fan motor with the 3 screws.
  Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
Fig 2: Locating Cooling Fan Motor Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 FAN
1. Install the No. 2 fan with the nut.
  Torque: 6.3 N*m (64 kgf*cm, 56 in.*lbf)
Fig 3: Locating No. 2 Fan Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FAN
1. Install the fan with the nut
  Torque: 6.3 N*m (64 kgf*cm, 56 in.*lbf)
Fig 4: Locating Fan Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT COOLING FAN MOTOR CONNECTORS
1. Connect the cooling fan motor connectors to the 2 cooling fan ECUs
2. Install the 2 clamps.
Fig 5: Locating Cooling Fan Motor Connectors
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR ASSEMBLY
HINT.

See INSTALLATION