LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Lubrication) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ENGINE UNDER COVER 
  2. DRAIN ENGINE OIL  (See OIL AND OIL FILTER )
  3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Disconnect the oil pressure switch connector.
    2. Using SST, remove the oil pressure switch

      SST 09922-10010 

      Fig 1: Removing Oil Pressure Switch
      G05750404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals