Engine Oil Cooler: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE UNDER COVER
DRAIN ENGINE OIL (See OIL AND OIL FILTER )
DRAIN ENGINE COOLANT (See COOLANT )
REMOVE ENGINE OIL COOLER
1. Disconnect the 2 water by-pass hoses.
  
  Fig 1: Locating Water By-Pass Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt, gasket, union bolt, oil cooler, and O-ring.
Fig 2: Identifying Bolt, Gasket, Union Bolt And Oil Cooler
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002