Rear Crankshaft Oil Seal: Installation
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL ENGINE REAR OIL SEAL
- Using SST, tap in a new engine rear oil seal until its surface is flush with the oil seal retainer edge.
SST 09223-15030, 09950-70010 (09951-07150)
NOTE:- Keep the lip free from foreign matter.
- Do not tap on the oil seal at an angle.
- Do not install the oil seal excessively.
- INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (See INSTALLATION )
- INSTALL AUTOMATIC TRANSMISSION ASSEMBLY
See INSTALLATION