LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Brake System (Hydraulic)) >> Brake Pedal >> Removal

Brake Pedal: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE BRAKE BOOSTER ASSEMBLY 

    HINT:

    Refer to the instructions for Removal of the brake booster assembly (See BRAKE BOOSTER ).

  2. REMOVE STOP LIGHT SWITCH ASSEMBLY  (See REMOVAL )
  3. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY 
    1. Disconnect the connector and disengage the clamp.
    2. Remove the bolt and brake pedal support assembly from the body.
    Fig 1: Locating Brake Pedal Support Assembly Bolt
    G05752750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals