Brake Pedal: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL BRAKE PEDAL SUPPORT ASSEMBLY
1. Install the brake pedal support assembly with the bolt
  Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
2. Connect the connector and engage the clamp.
Fig 1: Locating Brake Pedal Support Assembly With Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STOP LIGHT SWITCH ASSEMBLY (See INSTALLATION )
INSTALL BRAKE BOOSTER ASSEMBLY
HINT.

Refer to the instructions for Installation of the brake booster assembly (See BRAKE BOOSTER ).