LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Exterior) >> Rocker Panel Molding >> Disassembly

Rocker Panel Molding: Disassembly

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ROCKER PANEL MOLDING CLIP 
    1. Remove the 16 rocker panel molding clips
      Fig 1: Identifying Rocker Panel Molding Clips
      G05756787Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE NO. 2 FRONT DOOR WEATHERSTRIP 
    1. Disengage the 13 clips and remove the No. 2 front door weatherstrip
      Fig 2: Identifying No. 2 Front Door Weatherstrip Clips
      G05756788Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE NO. 1 ROCKER PANEL MOLDING PROTECTOR 
    1. Remove the 2 No. 1 rocker panel molding protectors.
      Fig 3: Identifying No. 1 Rocker Panel Molding Protectors
      G05756789Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 2 ROCKER PANEL MOLDING PROTECTOR 
    1. Remove the No. 2 rocker panel molding protector.
      Fig 4: Identifying No. 2 Rocker Panel Molding Protector
      G05756790Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE NO. 3 ROCKER PANEL MOLDING PROTECTOR 
    1. Remove the No. 3 rocker panel molding protector
      Fig 5: Identifying No. 3 Rocker Panel Molding Protector
      G05756791Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE NO. 4 ROCKER PANEL MOLDING PROTECTOR 
    1. Remove the No. 4 rocker panel molding protector.
      Fig 6: Identifying No. 4 Rocker Panel Molding Protector
      G05756792Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE FRONT FENDER UPPER OUTSIDE MOLDING PAD 
    1. Remove the front fender upper outside molding pad.
      Fig 7: Identifying Front Fender Upper Outside Molding Pad
      G05756793Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE NO. 5 ROCKER PANEL MOLDING PROTECTOR 
    1. Remove the No. 5 rocker panel molding protector.
      Fig 8: Identifying No. 5 Rocker Panel Molding Protector
      G05756794Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE NO. 6 ROCKER PANEL MOLDING PROTECTOR 
    1. Remove the No. 6 rocker panel molding protector
      Fig 9: Identifying No. 6 Rocker Panel Molding Protector
      G05756795Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE NO. 2 FRONT FENDER MOLDING RETAINER 
    1. Remove the No. 2 front fender molding retainer
      Fig 10: Identifying No. 2 Front Fender Molding Retainer
      G05756796Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE NO. 2 BODY OUTSIDE MOLDING PAD 
    1. Remove the No. 2 body outside molding pad.
      Fig 11: Identifying No. 2 Body Outside Molding Pad
      G05756797Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals