LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Exterior) >> Rear Door Belt Molding >> Installation

Rear Door Belt Molding: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL REAR DOOR BELT MOLDING ASSEMBLY 
    1. Engage the 5 clips and install the rear door belt molding assembly.
      Fig 1: Identifying Rear Door Belt Molding Assembly Clips
      G05756778Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals