Front Door Belt Molding: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FRONT DOOR BELT MOLDING ASSEMBLY
1. Engage the 7 clips and install the front door belt molding assembly
  
  Fig 1: Identifying Front Door Belt Molding Assembly Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT DOOR FRAME COVER
1. Install the front door frame cover with the nut.
Fig 2: Identifying Front Door Frame Cover With Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP (See REASSEMBLY )
INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (See REASSEMBLY )
INSTALL COURTESY LIGHT ASSEMBLY (See REASSEMBLY )
INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (See REASSEMBLY )
INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG (See REASSEMBLY )