LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> Back Door Courtesy Switch >> Inspection

Back Door Courtesy Switch: Inspection

  1. INSPECT BACK DOOR COURTESY SWITCH 
    1. Measure the resistance according to the value (s) in the table below.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Switch Condition Specified Condition
      Q23-1 - Q23-2 Door LOCK position 10 kΩ or higher
      Q23-1 - Q23-2 Door UNLOCK position Below 1 Ω

      If the result is not as specified, replace the switch.

      Fig 1: Identifying Back Door Courtesy Switch
      G05832332Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals