Typical Malfunction Thresholds
TYPICAL MALFUNCTION THRESHOLDS
| One of the following conditions is met | Condition A, B or C |
| A All of the following conditions are met | Condition (a), (b) and (c) |
| a. Battery voltage | 11 V to 13 V |
| b Target duty ratio | Less than 70 % |
| c Output signal duty ratio | 100% or more |
| B All of the following conditions are met | Condition (a), (b) and (c) |
| a. Battery voltage | 13 V or more |
| b Target duty ratio | Less than 80 % |
| c Output signal duty ratio | 100% or more |
| C Both of the following conditions are met | Condition (a) and (b) |
| a. Current cut status | Not cut |
| b Output signal duty ratio | 3 % or less |