Rear Seat Assembly: Removal

REMOVE REAR SEAT CUSHION ASSEMBLY
1. Detach the seat cushion's 2 front hooks from the vehicle body.
  NOTE: Follow the instructions below carefully as the cushion frame deforms easily.
  1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
  2. Repeat for the other hook.
2. Detach the seat cushion's 2 rear hooks from the seatback.
3. Remove the seat cushion.
  
  Fig 1: Identifying Seat Cushion's Front Hooks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR SEAT HEADREST ASSEMBLY LH AND RH
REMOVE REAR SEAT HEADREST ASSEMBLY CENTER
REMOVE REAR SEATBACK ASSEMBLY
1. Using a screwdriver, detach the claws and remove the 2 rear seat covers.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 2: Removing Rear Seat Covers And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a screwdriver, detach the claw to open the cap of each of the 3 rear seat shoulder belt guides.
3. Remove the bolt and floor anchor part.
  
  Fig 3: Removing Claw To Open Cap Of Rear Seat Shoulder Belt Guides
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 4 bolts and 2 nuts.
5. Remove the seatback.