Headlight Dimmer Switch: Installation
- INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
- Install the headlight dimmer switch with the claw as shown in the illustration.
HINT:
Make sure that the claw is completely engaged.
- Install the headlight dimmer switch with the clamp.
- Connect the connector.
- Install the headlight dimmer switch with the claw as shown in the illustration.
- INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY (See INSTALLATION )
- INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING SENSOR (See INSTALLATION )
- INSTALL STEERING COLUMN COVER UPPER (See INSTALLATION )
- INSTALL STEERING COLUMN COVER LOWER (See INSTALLATION )
- ADJUST SPIRAL CABLE SUB-ASSEMBLY WITH STEERING SENSOR (See INSTALLATION )
- INSTALL STEERING WHEEL ASSEMBLY (See INSTALLATION )
- INSPECT STEERING WHEEL CENTER POINT
- Inspect the steering wheel center point (see INSTALLATION ).
- INSTALL STEERING PAD (See INSTALLATION )
- INSTALL NO. 3 STEERING WHEEL COVER LOWER
- INSTALL NO. 2 STEERING WHEEL COVER LOWER
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- INSPECT STEERING PAD (See INSTALLATION )
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see
INITIALIZATION
).
- CHECK SRS WARNING LIGHT
- Inspect the SRS warning light (see DIAGNOSIS SYSTEM ).