Front Passenger Airbag Assembly: Installation

1. Engage the 5 hooks (A).
2. Engage the 5 hooks (B) and install the front passenger airbag assembly on the instrument panel.
   Fig 1: Locating Front Passenger Airbag Assembly Hooks

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 screws.
   Fig 2: Identifying Front Passenger Airbag Assembly Screws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the 2 connectors to the front passenger airbag assembly.
   NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

(See INSTALLATION )

HINT:

Refer to the procedures from " 4INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY".

Fig 3: Locating Front Passenger Airbag Assembly Connectors

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002