Instrument Panel Speaker: Removal

REMOVE SPEAKER HOLE COVER
1. Using a screwdriver, detach the 4 clips and remove the hole cover.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 1: Identifying Speaker Hole Cover Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT STEREO COMPONENT SPEAKER ASSEMBLY
1. Remove the 2 bolts.
2. Disconnect the connector and remove the speaker.
  HINT:
  
  Do not touch the cone part of the speaker.
  
  Fig 2: Locating Front Stereo Component Speaker Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
1. Using a screwdriver, detach the 2 clips and 2 claws.
  HINT:
  
  Tape the screwdriver tip before use.
2. Remove the speaker panel.
REMOVE FRONT NO. 2 SPEAKER ASSEMBLY
1. Remove the 2 bolts.
  
  Fig 3: Identifying No. 2 Instrument Panel Speaker Panel Sub-Assembly Clips And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 4: Locating Front No. 2 Speaker Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the connector and remove the speaker.
  HINT:
  
  Do not touch the cone part of the speaker.