LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h FWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> High Mounted Stop Light Assembly >> Installation

High Mounted Stop Light Assembly: Installation

  1. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY 
    1. Install the strap to the connector of the high mounted stop light assembly.

      HINT:

      Leave the strap inside the rear spoiler.

    2. Pass the connector through the inside of the rear spoiler and install the high mounted stop light assembly with the 2 screws.
    Fig 1: Installing High Mounted Stop Light Assembly
    G05273981Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL REAR SPOILER SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL BACK WINDOW PANEL TRIM UPPER (w/ Power Back Door) 
  4. INSTALL BACK DOOR TRIM BOARD (w/ Power Back Door) 
  5. INSTALL BACK WINDOW PANEL TRIM UPPER (w/o Power Back Door) 
scientia non olet · About LEMON Manuals