LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Visual >> Front No. 2 Speaker >> Installation

Front No. 2 Speaker: Installation

  1. INSTALL FRONT NO.2 SPEAKER 
    1. Connect the connector.
    2. Install the front No.2 speaker with the 2 bolts.
    Fig 1: Locating Front No.2 Speaker Bolts
    G05270759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO.1 SPEAKER HOLE COVER 
    1. Engage the 4 clips and install the No.1 speaker hole cover.
      2. Fig 2: Installing No.1 Speaker Hole Cover
      G05270761Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL MULTI-DISPLAY (See  INSTALLATION  ) 
  4. INSTALL RADIO RECEIVER (See  INSTALLATION  ) 
  5. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER  (See INSTALLATION )
  6. INSTALL CONSOLE PANEL UPPER FRONT  (See INSTALLATION )
  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  9. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal. (See INITIALIZATION )
scientia non olet · About LEMON Manuals