LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> Hybrid Vehicle Control (P310) - RX400H - Inverter With Converter, Vehicle Control Ecu, Water Pump With Motor, Sub Radiator, Frame Wire, Accelerator Pedal Rod, Front/Rear Circuit Breaker Sensors, IGCT Relay >> IGCT Relay >> Inspection

IGCT Relay: Inspection

  1. INSPECT IGCT RELAY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance 

      TESTER CONNECTION AND SPECIFIED CONDITION

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      3 - 5 Below 1 Ω (when battery voltage is applied between terminals 1 and 2)

      If the result is not as specified, replace the relay.

      Fig 1: Inspecting IGCT Relay
      G05201698Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002