LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> Hybrid Vehicle Control (P310) - RX400H - Inverter With Converter, Vehicle Control Ecu, Water Pump With Motor, Sub Radiator, Frame Wire, Accelerator Pedal Rod, Front/Rear Circuit Breaker Sensors, IGCT Relay >> Accelerator Pedal Rod >> Removal

Accelerator Pedal Rod: Removal

  1. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Disconnect the connector from the accelerator pedal rod assembly.
    2. Remove the 2 nuts and accelerator pedal rod assembly.
    Fig 1: Locating Accelerator Pedal Rod Assembly Nuts
    G05201852Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals