Inspection Procedure
- READ OUTPUT DTC (ALL)
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch to the ON position.
- Select the following menu items: DIAGNOSIS / OBD/ MOBD / HV ECU / DTC INFO / CURRENT CODES.
- Read output DTCs.
Result
DTC RESULT DESCRIPTIONOutput DTC Proceed to U0100-211, U0100-212, or U0100-530 only is output. A DTCs other than above are output. B A: REPLACE HYBRID VEHICLE CONTROL ECU
B: GO TO CAN COMMUNICATION SYSTEM