DTC P1606-308 Collision Detection: Description

The HV control ECU receives collision signals from the airbag sensor assembly CTR, circuit breaker sensor (front collision sensor), circuit breaker sensor RR RH (rear collision sensor right), and circuit breaker sensor RR LH (rear collision sensor left) to detect the destruction of the vehicle. After detecting the destruction of the vehicle, the HV control ECU shuts off the high-voltage systems for safety.

DTC DETECTION CONDITION AND TROUBLE AREA

DTC No.	INF Code	DTC Detection Condition	Trouble Area
P1606	308	Shutoff signal from the airbag sensor assembly CTR is determined Collision is determined by the signal from the circuit breaker sensor (front collision sensor) Collision is determined by the signal from the rear circuit breaker sensor RH (rear collision sensor right) Collision is determined by the signal from the rear circuit breaker sensor LH (rear collision sensor left)	Center airbag sensor assembly Circuit breaker sensor Rear circuit breaker sensor RH Rear circuit breaker sensor LH Destruction of the vehicle

HINT:

If P1608-308 is output, the vehicle cannot start unless the DTC is cleared using the intelligent tester.