Typical Malfunction Thresholds
TYPICAL MALFUNCTION THRESHOLDS
| One of the following conditions is met: | Condition 1, 2, or 3 |
| 1. All of the following conditions are met: | Conditions (a), (b), and (c) |
| (a) Battery voltage | 11 to 13 V |
| (b) Target duty ratio | Less than 70 % |
| (c) Output signal duty ratio | 100% |
| 2. All of the following conditions are met: | Conditions (d), (e), and (f) |
| (d) Battery voltage | 13 V or more |
| (e) Target duty ratio | Less than 80 % |
| (f) Output signal duty ratio | 100% |
| 3. All of the following conditions are met: | Condition (g) and (h) |
| (g) Current cut status | Not cut |
| (h) Output signal duty ratio | 3 % or more |