Front Brake Pad, Brake Caliper & Brake Rotor: Installation

INSTALL DISC BRAKE CYLINDER ASSEMBLY LH
1. Install the disc brake cylinder assembly LH with the 2 bolts.
  Torque: 34 N*m (350 kgf*cm, 25 ft.*lbf)
  
  Fig 1: Identifying Disc Brake Cylinder Assembly LH Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT FRONT FLEXIBLE HOSE
1. Connect the flexible hose with the union bolt and a new gasket.
  Torque: 29 N*m (300 kgf*cm, 21 ft.*lbf)
  
  NOTE: Install the flexible hose lock securely in the lock hole in the disc brake cylinder sub-assembly.
FILL RESERVOIR WITH BRAKE FLUID (See BLEEDING )
BLEED MASTER CYLINDER (See BLEEDING )
BLEED BRAKE LINE (See BLEEDING )
CHECK FLUID LEVEL IN RESERVOIR (See BLEEDING )
CHECK BRAKE FLUID LEAKAGE
INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)