LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 350 FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Pedal >> Removal

Brake Pedal: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER  (See REMOVAL )
  3. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See REMOVAL )
  4. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE COMBINATION METER ASSEMBLY  (See REMOVAL )
  6. REMOVE BRAKE PEDAL RETURN SPRING 
    1. Remove the brake pedal return spring.
  7. REMOVE PUSH ROD PIN 
    1. Remove the clip and the push rod pin.
    2. Disconnect the stop light switch connector.
    3. Disconnect the pedal force switch connector and release the clip of the pedal force switch.
      Fig 1: Identifying Pedal Force Switch Connector
      G05241769Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY 
    1. Remove the bolt, the 4 nuts and the brake pedal support assembly.
      Fig 2: Identifying Brake Pedal Support Assembly Bolt & Nuts
      G05272830Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE BRAKE PEDAL SUB-ASSEMBLY 
    1. Remove the nut, the brake pedal shaft and the brake pedal sub-assembly from the brake pedal support sub-assembly.
scientia non olet · About LEMON Manuals