DTC P1442 Stuck Close in Secondary Air Injection Vacuum Switching Valve Bank 1; DTC P1445 Stuck Close in Secondary Air Injection Vacuum Switching Valve Bank 2; DTC P2441 Secondary Air Injection System Switching Valve Stuck Close Bank 1: Description
Refer to DTC P0412 .
DTC DETECTION CONDITION AND TROUBLE AREA
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P1442 | No. 2 air switching valve (bank 1) stuck closed: No pressure change (decrease) after the ECM sends an open No. 2 air switching valve (bank 1) signal. (2 trip detection logic) |
|
| P1445 | No. 2 air switching valve (bank 2) stuck closed: No pressure change (decrease) after the ECM sends an open No. 2 air switching valve (bank 2) signal. (2 trip detection logic) |
|
| P2441 | Air switching valve stuck closed: The pressure sensor does not detect exhaust pulsation when system operates. (All of air switching valve ON) This DTC means either of the following conditions is met.
|
|