Typical Enabling Conditions
All
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present | None |
| Engine switch | on |
| Starter | OFF |
Condition (A)
TYPICAL ENABLING CONDITIONS
| Battery voltage | 12 V or more |
Condition (B)
TYPICAL ENABLING CONDITIONS
| Battery voltage | 10 V or more and less than 12 V |
| Target current | Less than 0.75 A |
Condition (C)
TYPICAL ENABLING CONDITIONS
| Battery voltage | 8 V or more |
| Target current | 0.25 A or more |