SEAT MEMORY SWITCH (for Front Side): Inspection
- INSPECT SEAT MEMORY SWITCH LH
- Measure the resistance according to the value(s) in the table below.
Standard resistance
SEAT MEMORY SWITCH LHTester Connection Switch Condition Specified Condition 4 (1) - 7 (E) M1 switch Pressed Below 1 Ω 2 (2) - 7 (E) M2 switch Pressed Below 1 Ω 1 (3) - 7 (E) M3 switch Pressed Below 1 Ω 5 (MMRY) - 7 (E) SET switch Pressed Below 1 Ω If the result is not as specified, replace the switch.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Measure the resistance according to the value(s) in the table below.
- INSPECT SEAT MEMORY SWITCH RH
- Measure the resistance according to the value(s) in the table below.
Standard resistance
SEAT MEMORY SWITCH RHTester Connection Switch Condition Specified Condition 4 (1) - 7 (E) M1 switch Pressed Below 1 Ω 2 (2) - 7 (E) M2 switch Pressed Below 1 Ω 1 (3) - 7 (E) M3 switch Pressed Below 1 Ω 5 (MMRY) - 7 (E) SET switch Pressed Below 1 Ω If the result is not as specified, replace the switch.
- Measure the resistance according to the value(s) in the table below.