POWER SEAT SWITCH (for Front Passenger Side): Inspection

INSPECT POWER SEAT SWITCH ASSEMBLY (for Front Passenger Seat)

w/o Seat ECU:

Measure the resistance according to the value(s) in the table below.

Fig 1: Identifying Power Seat Switch Assembly Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard resistance (Reclining switch)

POWER SEAT SWITCH ASSEMBLY (FOR FRONT PASSENGER SEAT) (W/O SEAT ECU - RECLINING SWITCH)

Tester Connection	Switch Condition	Specified Condition
4 (RCLF) - 3 (B)	FRONT	Below 1 Ω
5 (RCLR) - 3 (B)	REAR	Below 1 Ω

Standard resistance (Slide switch)

POWER SEAT SWITCH ASSEMBLY (FOR FRONT PASSENGER SEAT) (W/O SEAT ECU - SLIDE SWITCH)

Tester Connection	Switch Condition	Specified Condition
2 (SLDF) - 3 (B)	FRONT	Below 1 Ω
1 (SLDR) - 3 (B)	REAR	Below 1 Ω

w/Seat ECU:

Fig 2: Identifying Power Seat Switch Assembly Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Measure the resistance according to the value(s) in the table below.

Standard resistance (Full front switch)

POWER SEAT SWITCH ASSEMBLY (FOR FRONT PASSENGER SEAT) (W/SEAT ECU - FULL FRONT SWITCH)

Tester Connection	Switch Condition	Specified Condition
4 (HRFS) - 3 (E)	FULL FRONT	Below 1 Ω
5 (HRRS) - 3 (E)	RETURN	Below 1 Ω

Standard resistance (Slide switch)

POWER SEAT SWITCH ASSEMBLY (FOR FRONT PASSENGER SEAT) (W/SEAT ECU - SLIDE SWITCH)

Tester Connection	Switch Condition	Specified Condition
2 (SLDF) - 3 (E)	FRONT	Below 1 Ω
1 (SLDR) - 3 (E)	REAR	Below 1 Ω

If the result is not specified, replace the switch.