DTC P1442, P1445, P2441: Stuck Close in Secondary Air Injection Vacuum Switching Valve Bank 1; Stuck Close in Secondary Air Injection Vacuum Switching Valve Bank 2; Secondary Air Injection System Switching Valve Stuck Close Bank 1: Description
Refer to DESCRIPTION .
DTC DETECTION CONDITION TABLE
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P1442 | No. 2 air switching valve (bank 1) stuck closed: No pressure change (decrease) after the ECM sends an open No. 2 air switching valve (bank 1) signal. (2 trip detection logic) |
|
| P1445 | No. 2 air switching valve (bank 2) stuck closed: No pressure change (decrease) after the ECM sends an open No. 2 air switching valve (bank 2) signal. (2 trip detection logic) |
|
| P2441 | Air switching valve stuck closed: The pressure sensor does not detect exhaust pulsation when system operates. (All of air switching valve ON) This DTC means either of the following conditions is met.
(2 trip detection logic) |
|