Rear Seat Assembly: Removal

REMOVE REAR SEAT CUSHION ASSEMBLY
1. Detach the seat cushion's 2 front hooks from the vehicle body.
  NOTE: Follow the instructions below carefully as the cushion frame deforms easily.
  1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
  2. Repeat for the other hook.
2. Detach the seat cushion's 2 rear hooks from the seatback.
3. Remove the seat cushion.
  
  Fig 1: Locating Seat Cushion Rear Hooks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR SEAT HEADREST ASSEMBLY LH AND RH
REMOVE REAR SEAT HEADREST ASSEMBLY CENTER
REMOVE REAR SEATBACK ASSEMBLY

Fig 2: Identifying Claws And Rear Seat Covers
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Using a screwdriver, detach the claws and remove the 2 rear seat covers.
  HINT:
  
  Tape the screwdriver tip before use.
2. Using a screwdriver, detach the claw to open the cap of each of the 3 rear seat shoulder belt guides.
3. Remove the bolt and floor anchor part.
  
  Fig 3: Using Taped Screwdriver To Open Cap Of Rear Seat Shoulder Belt Guides
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 4 bolts and 2 nuts.
  
  Fig 4: Identifying Rear Seatback With Bolts And Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the seatback.