LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GS 450h >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat >> Rear Seat Assembly >> Installation

Rear Seat Assembly: Installation

  1. INSTALL REAR SEATBACK ASSEMBLY 
    1. Place the seatback in the cabin.
      NOTE: Be careful not to damage the vehicle body.
    2. Install the seatback with the 4 bolts and 2 nuts.

      Torque: 18.1 N*m (185 kgf*cm, 13 ft.*lbf) 

    3. Install the 2 rear seat covers.
    4. Pass the 3 seat belts through the 3 rear seat shoulder belt guides and close the 3 caps.
    5. Install the floor anchor part with the bolt.
      Fig 1: Identifying Rear Seatback With Bolts And Nut
      G05300569Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL REAR SEAT HEADREST ASSEMBLY CENTER 
  3. INSTALL REAR SEAT HEADREST ASSEMBLY LH AND RH 
  4. INSTALL REAR SEAT CUSHION ASSEMBLY 
    1. Attach the seat cushion's 2 rear hooks to the seatback.
    2. Attach the seat cushion's 2 front hooks to the vehicle body.
    3. Confirm that seat cushion is firmly installed.
      NOTE: When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.
      Fig 2: Identifying Seat Cushion Rear Hooks
      G05315445Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals