LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GS 350 RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - A760E >> Floor Shift Assembly >> Inspection

Floor Shift Assembly: Inspection

  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Connect the park/neutral position switch connector.
    2. Disconnect the transmission control switch connector from the shift lock control unit assembly.
      Fig 1: Identifying Transmission Control Switch
      G05288279Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Measure resistance according to the value(s) in the table below when the shift lever is moved to each position.

      Standard resistance 

      RESISTANCE SPECIFIED CONDITION

      Shift Position Tester Connection Specified Condition
      S, "+" and "-" 3 - 7 Below 1 Ω
      Except S, "+" and "-" 3-7 10 kΩ or higher
    Fig 2: Identifying Transmission Control Switch Connector Terminal
    G05288280Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals