LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GS 350 RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Stop Light Switch >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT STOP LIGHT SWITCH ASSEMBLY 
    1. Check the protrusion of the stop light switch assembly shaft.

      Protrusion of the stop light switch assembly shaft: 

      0.5 to 2.4 mm (0.020 to 0.095 in.) 

      If the protrusion is off the specified value, adjust it.

      NOTE: Do not depress the brake pedal.
    Fig 1: Identifying Protrusion Of Stop Light Switch Assembly Shaft
    G05297334Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals