Rear Seat Assembly: Removal

REMOVE REAR SEAT CUSHION ASSEMBLY
1. Detach the seat cushion's 2 front hooks from the vehicle body.
  NOTE: Follow the instructions below carefully as the cushion frame deforms easily.
  1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
    
    Fig 1: Removing Rear Seat Cushion Assembly
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Repeat for the other hook.
2. Detach the seat cushion's 2 rear hooks from the seatback.
3. Remove the seat cushion.
REMOVE REAR SEAT HEADREST ASSEMBLY LH AND RH
REMOVE REAR SEAT HEADREST ASSEMBLY CENTER
REMOVE REAR SEATBACK ASSEMBLY

Fig 2: Removing Rear Seatback Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Using a screwdriver, detach the claws and remove the 2 rear seat covers.
  HINT:
  
  Tape the screwdriver tip before use.
2. Using a screwdriver, detach the claw to open the cap of the 3 rear seat shoulder belt guides.
3. Remove the bolt and floor anchor part.
  
  Fig 3: Removing Bolt And Floor Anchor Part
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 4 bolts and 2 nuts.
5. Remove the seatback.
  
  Fig 4: Removing Seatback
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002