Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever the following DTCs are not present | None |
|---|---|
| Either following condition A or B is met: | - |
| Engine RPM | 1,500 rpm or less |
| Starter | OFF |
| Either following condition C or D is met: | - |
| Both of the following conditions are met: | - |
| (a) Engine speed | 500 rpm or less |
| (b) Battery voltage | 6 V or more |
| All of the following conditions are met: | - |
| (a) Engine speed | More than 500 rpm |
| (b) Battery voltage | 10 V or more |
| (c) Number of sparks after CPU reset | 5 sparks or more |